View LFD4H5-62M-XX-RP9_126614.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only FOUR DIGIT LED DISPLAY(0.39Inch)
LFD4H5/62M-XX/RP9
DATA SHEET
DOC. NO : REV. DATE : :
QW0905-LFD4H5/62M-XX/RP9 A 28 - Sep. - 2005
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 1/7
Package Dimensions
39.2(1.543")
6.4 (0.252")
10.16 (0.4")
DIG.1
DIG.2 DP1 DIG.3 DP2
DIG.4 12.9 (0.508") 10.28 (0.405")
1.4 (0.055")
0.45TYP
A
LFD4H5/62M-XX/RP9 LIGITEK
FGB E C D DP
9.00.5
2.54*4 =10.16
10.16
2.54*4 =10.16
PIN 1
PIN 5
PIN 6
PIN 10
PIN NO.1
Note : 1.All dimension are in millimeters and (lnch) tolerance is 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 2/7
Internal Circuit Diagram
LFD4H52M-XX/RP9
20 DIG.1 ABCDEFG DIG.2
5 DIG.3
15 DIG.4
10
A B C D E F G DP1
ABCDEFG
A B C D E F G DP2
17 16 4 1 3 18 19
2
12 11 9 6 8 13 14
7
LFD4H62M-XX/RP9
20 DIG.1 ABCDEFG DIG.2
5 DIG.3
15 DIG.4
10
A B C D E F G DP1
ABCDEFG
A B C D E F G DP2
17 16 4 1 3 18 19
2
12 11 9 6 8 13 14
7
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 3/7
Electrical Connection
PIN NO 1 2 3 4 5 6 7 8 9 10 LFD4H52M-XX/RP9 Anode D (Dig.1,Dig.2) Anode 1 PIN NO 1 2 3 4 5 6 7 8 9 10 LFD4H62M-XX/RP9 Cathode D (Dig.1,Dig.2) Cathode DP1 Cathode E (Dig.1,Dig.2) Cathode C (Dig.1,Dig.2) Common Anode Dig.2 Cathode D (Dig.3,Dig.4) Cathode DP2 Cathode E (Dig.3,Dig.4) Cathode C (Dig.3,Dig.4) Common Anode Dig.4 Cathode B (Dig.3,Dig.4) Cathode A (Dig.3,Dig.4) Cathode F (Dig.3,Dig.4) Cathode G (Dig.3,Dig.4) Common Anode Dig.3 Cathode B (Dig.1,Dig.2) Cathode A (Dig.1,Dig.2) Cathode F (Dig.1,Dig.2) Cathode G (Dig.1,Dig.2) Common Anode Dig.1
Anode E (Dig.1,Dig.2) Anode C (Dig.1,Dig.2) Common Cathode Dig.2 Anode D (Dig.3,Dig.4) Anode DP2 Anode E (Dig.3,Dig.4) Anode C (Dig.3,Dig.4) Common Cathode Dig.4 Anode B (Dig.3,Dig.4) Anode A (Dig.3,Dig.4) Anode F (Dig.3,Dig.4) Anode G (Dig.3,Dig.4) Common Cathode Dig.3 Anode B (Dig.1,Dig.2) Anode A (Dig.1,Dig.2) Anode F (Dig.1,Dig.2) Anode G (Dig.1,Dig.2) Common Cathode Dig.1
11 12
11 12
13 14 15 16 17 18 19 20
13 14 15 16 17 18 19 20
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 4/7
Absolute Maximum Ratings at Ta=25
Ratings Parameter Symbol MG Forward Current Per Chip Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) Power Dissipation Per Chip Reverse Current Per Any Chip Operating Temperature Storage Temperature IF 30 mA UNIT
IFP
120
mA
PD Ir Topr Tstg
100 10 -25 ~ +85 -25 ~ +85
mW
A
Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260
Part Selection And Application Information(Ratings at 25)
Electrical
PART NO
common P D Vf(v) Iv(mcd) IV-M cathode (nm) (nm) (nm) Material Emitted or anode Min. Typ. Max. Min. Typ.
CHIP Common Cathode
GaP Green
LFD4H52M-XX/RP9
564 Common Anode
568
30
1.7
2.1
2.6
1.75 3.05
2:1
LFD4H62M-XX/RP9
Note : 1.The forward voltage data did not including 0.1V testing tolerance. 2. The luminous intensity data did not including 15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 5/7
Test Condition For Each Parameter
Parameter Forward Voltage Per Chip Luminous Intensity Per Chip Peak Wavelength Dominant Wavelength Spectral Line Half-Width Reverse Current Any Chip Luminous Intensity Matching Ratio
Symbol Vf Iv
Unit volt mcd nm nm nm
Test Condition If=20mA If=10mA If=20mA If=20mA If=20mA Vr=5V
P D
Ir IV-M
A
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 6/7
Typical Electro-Optical Characteristics Curve
MG CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
3.5
1000
Forward Current(mA)
100
Relative Intensity Normalize @20mA
1.0 2.0 3.0 4.0 5.0
3.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000
10 1.0
0.1
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
Forward Voltage@20mA Normalize @25
1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100
Relative Intensity@20mA Normalize @25
1.2
Ambient Temperature()
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directive Radiation
1.0
Relative Intensity @20mA
0.5
0.0 500 550 600 650
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LFD4H5/62M-XX/RP9 Page 7/7
Reliability Test:
Test Item
Test Condition
1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs)
Description
This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed.
Reference Standard
MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test
1.Ta=105 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours.
MIL-STD-883:1008 JIS C 7021: B-10
Low Temperature Storage Test
1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
JIS C 7021: B-12
High Temperature High Humidity Test
1.Ta=65 5 2.RH=90 %~95% 3.t=240hrs 2hrs
The purpose of this test is the resistance of the device under tropical for hous.
MIL-STD-202:103B JIS C 7021: B-11
Thermal Shock Test
1.Ta=105 5&-405 (10min) (10min) 2.total 10 cycles
The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire.
MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011
Solder Resistance Test
1.T.Sol=260 5 2.Dwell time= 10 1sec.
MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1
Solderability Test
1.T.Sol=230 5 2.Dwell time=5 1sec
This test intended to see soldering well performed or not.
MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2
PACKING SPECIFICATION
1. 12PCS / TUBE
2. 56 TUBES / INNER BOX SIZE : L X W X H 55cm X 22.5cm X 10cm
L W H
3. 4 INNER BOXES / CARTON SIZE : L X W X H 56.5cm X 47.5cm X 24cm
L W H
C/NO: MADE IN CHINA

▲Up To Search▲

Price & Availability of LFD4H5-62M-XX-RP9

	To Download LFD4H5-62M-XX-RP9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .